Manuals / Brands / Communications / Cordless Telephone / HP / Communications / Cordless Telephone

HP 5350 Out of range, flash continuously, Battery level icons, Battery performance, If the icons on the display

1 83

Download 83 pages, 1.24 Mb

BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193

If the icons on the displayflash continuously...

It means that the handset is not registered with the base station.

Ensure you have correctly carried out step 3 above. If the product has still not registered, please see “Registering manually” on page 70.

All additional handsets you purchase will need to be individually registered with the base station before they will work with the BT Diverse 5350.

Leave the handset for approx. 16 hours in the base station to charge the batteries, as they are not charged in the factory. The battery status icon flashes on the handset to indicate that the batteries are being charged.

Battery level icons

When the batteries are almost flat a beep sounds and the display shows the empty battery icon. You will need to recharge your handset before you can use it. The various states of charge are shown below:

Batteries fully charged

Batteries at 66%

Batteries at 33%

Batteries empty

Out of range?

If you go out of range of a base station for a long time while your handset is switched ON, it may take more than 20 minutes to ‘find’ the base station again when you come back within range. However, by simply switching the handset OFF for a moment, then ON again, it will find the base station within a few seconds.

Battery performance

Batteries and case may become warm during charging. This is normal.

Under ideal conditions, the handset batteries should give about 13 hours talktime or 170 hours standby time on a single charge. However, new NiMH batteries do not reach their full capacity until they have been in normal use for several days.

The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries

are available from www.withandwithoutwires.com or call 0870 240 5522.

If you replace the handset batteries with ones that have been fully charged, the battery indicator will not show full until the next charge cycle has been completed. Charge the handset until the batteries register full again. From then on the display will be correct.

UP SETTING

BT Diverse Helpline – 08457 908 070

13

Contents

BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 Page At a glance Base Base underside In this guide Page Page Page Quick guide to handset settings INT MENU Introduction Safety information Setting up 3Registering and charging the handset Insert the batteries If the icons on the display flash continuously Battery level icons Out of range Battery performance 4Connect the telephone line cord to the base and plug into the wall socket Note Setting the date and time Menu DOWN Using the telephone To receive an external call To adjust the handsfree volume whilst in handsfree mode LEFT RIGHT To answer a call in handsfree To switch to handsfree during a call To store an entry in the directory DIRECTORY Page To mark a directory entry as a VIP caller To dial a number in the directory To view directory entry To edit a directory entry To copy an entry to another Diverse 5000 handset LEFT/RIGHT DELETE EXTRA DIRECTORY To copy the entire directory to another Diverse 5000 handset To delete an entry To delete the entire directory Extra directory To record a voice pattern for a new entry To record a voice pattern for an existing entry To dial a number using voice activated dialling GREEN PHONE To play a user’s voice pattern To delete a voice pattern To delete a voice activated entry To delete the entire voice activated list To enter a user name for a voice user To dial a number in the redial list REDIAL To copy numbers shown in the redial list to the directory To delete a number from the redial list To switch secrecy on/off PAGE To transfer an external call between handsets To put an external call on hold while you make an internal call To answer a waiting call during an internal call To switch listening in on and off To listen in on an external call Press the GREEN PHONE Caller Display and other BT Calling Features To view the Calls list ENVELOPE To call the number: To display the date and time the call was received: To display the status of the call: To copy a number from the Calls list to the directory: To delete a call from the Calls list: To delete the whole Calls list: RED To accept a waiting call Options before you make a call To withhold your number from being sent To switch Call Waiting on/off Ring Back Off To set Call Divert Additional features To retrieve messages from your Voice Mail service To switch Call Director on and off To record a Call Director announcement To play your Call Director announcement To delete your Call Director announcement Handset settings To change the display language Shortcut button To set the alarm ALARM CLOCK To stop the alarm ringing To cancel the alarm setting To set the appointment call To stop the appointment call alarm ringing To cancel a set appointment call To switch off your handset’s beeps and tones To switch auto talk on or off To reset a handset off high To give a handset a name rather than a number To switch walk and talk mode on and off To use walk and talk To enter an external or internal number for your room monitor call To enter an external number: To set the room monitor sensitivity level To switch the room monitor off To switch the room monitor off from another phone Base station settings deleted INT 1- INT tone 100ms 3secs Setting up and personalising your answering machine Answer Only To record your own outgoing message To play your outgoing message Down To select the outgoing message your callers will hear To delete your outgoing message Page To change the answer delay setting To adjust the message length To use call screening Using the BT Diverse 5350 answering machine via the base unit To adjust the loudspeaker volume during playback To switch the answering machine on and off To listen to your messages To record a memo message To delete all messages To copy a telephone number of a message to the directory Delete Forward Back To record your voice commands To switch the voice prompts on and off To operate the answering machine using voice activation Remote access Using additional handsets and bases To register a new BT Diverse 5300 handset to a 5350 base station To manually register a BT Diverse 5300 handset to another base station To register BT Diverse 2000/ 3000/4000 series handsets and other makes To de-registera handset Help Page General information To set the dialling mode To set the recall time To switch temporarily from pulse to tone dialling Setting pauses and hold To set a pause before dialling To set the duration of a pause Index Page Page Ofﬁces worldwide