HP 5350 manual Handset does not ring

BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193

Handset does not ring.	The handset ringer may be	Hold down ✱ to switch the ringer
	switched off.	back on.
The incoming caller’s number is	The caller’s number has been	Caller has to allow their number to
not displayed even though you	withheld.	be sent.
have Caller Display.
You keep hearing the error beep	You have pressed the wrong	Check the prompts in the display
(a descending tone).	button in a sequence.	or refer to instructions in the
		user guide.
The answering machine does	Memory is full.	Delete old messages.
not record any messages or
announcements.		Playback and delete new messages.
An answering machine message	The date/time is not set.	Set the date/time, see page 13.
does not have a time stamp.
During remote operation you are	You have not changed the base	Change the base station PIN to
unable to access messages	station PIN.	allow you to access messages
		from another phone.
You cannot record your voice	Your recordings might have	Try recording again but ensure you
pattern for voice activation.	sounded too different or were	speak clearly and record the words
	not clear enough.	using a similar tone.
You cannot dial, or use the	Your speech or commands were	Try speaking more closely or, ensure
answering machine via voice	not clear enough or, you have	voice activation is initiated.
activation.	not recorded the voice activate		HELP
	for these commands.

BT Diverse Helpline – 08457 908 070

73