HP 5350 To use walk and talk

BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193

To use walk and talk

Room monitor

To call a handset:

When you have switched walk and talk mode on for at least two handsets as shown on page 48:

Press the GREEN PHONE button.

Display will show Walk and Talk

Call to all

All handsets that are in walk and talk mode will be called. The connection will be made with the first handset to answer the walk and talk call.

To answer a call:

Press the GREEN PHONE button to take the call.

To end a call:

Press the RED PHONE button.

You can use a handset as a room monitor. If a certain noise level is reached, for example a baby crying, the handset will automatically dial an internal or external number which you have set.

The following points should be considered when using the room monitor:

•If you store an external number that has an answering machine connected, it should be switched off.

•Make sure Call barring is not set.

•Any incoming calls on the handset being used as the room monitor will not ring at the handset, however, the display will show when you have a call.

•The battery power is used up more quickly. If using for long periods of time it may be advisable to place the handset in the base to ensure that the battery does not run out.

•When an external number is called it will ring for approximately 90 seconds but room monitor calls to an internal number are unlimited.

SETTINGS HANDSET

BT Diverse Helpline – 08457 908 070

49

Contents

BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 Page At a glance Base Base underside In this guide Page Page Page Quick guide to handset settings INT MENU Introduction Safety information Setting up 3Registering and charging the handset Insert the batteries If the icons on the display flash continuously Battery level icons Out of range Battery performance 4Connect the telephone line cord to the base and plug into the wall socket Note Setting the date and time Menu DOWN Using the telephone To receive an external call To adjust the handsfree volume whilst in handsfree mode LEFT RIGHT To answer a call in handsfree To switch to handsfree during a call To store an entry in the directory DIRECTORY Page To mark a directory entry as a VIP caller To dial a number in the directory To view directory entry To edit a directory entry To copy an entry to another Diverse 5000 handset LEFT/RIGHT DELETE EXTRA DIRECTORY To copy the entire directory to another Diverse 5000 handset To delete an entry To delete the entire directory Extra directory To record a voice pattern for a new entry To record a voice pattern for an existing entry To dial a number using voice activated dialling GREEN PHONE To play a user’s voice pattern To delete a voice pattern To delete a voice activated entry To delete the entire voice activated list To enter a user name for a voice user To dial a number in the redial list REDIAL To copy numbers shown in the redial list to the directory To delete a number from the redial list To switch secrecy on/off PAGE To transfer an external call between handsets To put an external call on hold while you make an internal call To answer a waiting call during an internal call To switch listening in on and off To listen in on an external call Press the GREEN PHONE Caller Display and other BT Calling Features To view the Calls list ENVELOPE To call the number: To display the date and time the call was received: To display the status of the call: To copy a number from the Calls list to the directory: To delete a call from the Calls list: To delete the whole Calls list: RED To accept a waiting call Options before you make a call To withhold your number from being sent To switch Call Waiting on/off Ring Back Off To set Call Divert Additional features To retrieve messages from your Voice Mail service To switch Call Director on and off To record a Call Director announcement To play your Call Director announcement To delete your Call Director announcement Handset settings To change the display language Shortcut button To set the alarm ALARM CLOCK To stop the alarm ringing To cancel the alarm setting To set the appointment call To stop the appointment call alarm ringing To cancel a set appointment call To switch off your handset’s beeps and tones To switch auto talk on or off To reset a handset off high To give a handset a name rather than a number To switch walk and talk mode on and off To use walk and talk To enter an external or internal number for your room monitor call To enter an external number: To set the room monitor sensitivity level To switch the room monitor off To switch the room monitor off from another phone Base station settings deleted INT 1- INT tone 100ms 3secs Setting up and personalising your answering machine Answer Only To record your own outgoing message To play your outgoing message Down To select the outgoing message your callers will hear To delete your outgoing message Page To change the answer delay setting To adjust the message length To use call screening Using the BT Diverse 5350 answering machine via the base unit To adjust the loudspeaker volume during playback To switch the answering machine on and off To listen to your messages To record a memo message To delete all messages To copy a telephone number of a message to the directory Delete Forward Back To record your voice commands To switch the voice prompts on and off To operate the answering machine using voice activation Remote access Using additional handsets and bases To register a new BT Diverse 5300 handset to a 5350 base station To manually register a BT Diverse 5300 handset to another base station To register BT Diverse 2000/ 3000/4000 series handsets and other makes To de-registera handset Help Page General information To set the dialling mode To set the recall time To switch temporarily from pulse to tone dialling Setting pauses and hold To set a pause before dialling To set the duration of a pause Index Page Page Ofﬁces worldwide