HP 5L (C3941A) manual Formatter PCA, Formatter Board Removal

	Formatter PCA
C a u t i o n	ESD SENSITIVE!!!

1Remove the Printer Covers and complete the DC Controller removal direction up to step 8 (Figures 6-39 and 6-40).

2Remove the two cable clips (Figure 6-42, callout 1).

3Remove all (4) screws from the formatter cover (Figure 6-42, callout 2). Lift the I/O shield to remove it.

4Remove the Control Panel display cable (Figure 6-42, callout 3).

5Slide the formatter away from the DC Controller PCA to remove it from the connector.

Figure 6-42

	Formatter Board Removal
N o t e	The formatter I/O shield comes in two separate pieces. Be careful to order the
	correct pieces should you need to replace them.

6 - 46 Removal and Replacement