HP 5L (C3941A) manual Pressure Roller Removal

Pressure Roller

1Remove Printer Covers, Delivery Assembly (Figures 6-9 and 6-10), Fuser Pressure Plate (Figure 6-11), and Heating Element (Figures 6-13 through 6-15).

2Remove the Pressure Roller guide by lifting the edge (Figure 6-16, callout 1) and then rolling it gently backward (Figure 6-16, callout 2).

Figure 6-16

Pressure Roller Removal

3Lift the right end of the Pressure Roller up and out of the printer chassis. The left side will follow easily with the Pressure Roller gear still attached.

N o t e	When reinstalling the Pressure Roller, apply a drop of grease to the grounding plate
	on the right side of the shaft. (Refer to Chapter 8 for a part number.)

6 - 20 Removal and Replacement