HP 5L (C3941A) manual Fuser Exit Roller Assembly, Fuser Exit Roller Removal

Fuser Exit Roller Assembly

1Remove Printer Covers, Delivery Assembly (Figures 6-9 and 6-10), Fuser Pressure Plate (Figure 6-11), and Heating Element (Figures 6-13 through 6-15), Pressure Roller (Figure 6-16), and Face-Up/Face-Down Lever (Figure 6-17).

2Remove the gear from the left end of the roller shaft.

3Remove the Exit Roller Assembly by pressing the small, white tab upward (Figure 6-18, callout 1) and rotating it around (Figure 6-18, callout 2).

4Slide the Exit Roller Assembly forward and out to the right of the printer.

Figure 6-18

Fuser Exit Roller Removal

6 - 22 Removal and Replacement