2 How to Install Accessories In Your PC

Installing Memory

Upgrading the Millennium Board Memory

If your PC has the Millennium video board instead of integrated video memory, you can increase its memory to get more colors and better video resolution.

1Switch off the display and computer, and disconnect the power supply cables and any telecommunications cables. Remove the computer’s cover.

2Remove the retaining bracket from the rear of the PC (you can use a coin to unscrew it). Note which slot the board is in.

3Carefully remove the board from its slot, holding the board at each end by its top edge. Do not bend the board. With its components facing up, place the board on a clean, flat, solid, static-free surface. Handle the board by its edges.

4Install the memory module on the video board. Carefully slide the board back into its slot. Firmly press the board into the socket. Make sure that the board slides into the socket completely and does not touch components on other boards. Secure the board by replacing the retaining bracket.

VESA Connector

Carefully install the video memory module

25