2 How to Install Accessories In Your PC

Installing Mass Storage Devices

12Remove the power supply and place it upside down on the front drive unit.

13Connect the power cable to the rear of each drive. The connectors are shaped to fit one way only.

14Replace the power supply. Then push the front drive unit fully into the computer until the two retaining clips click into place.

15Retrieve the universal front bezel from the PC’s chassis by opening the two clips. (The universal front bezel for your PC can also be ordered from any authorized HP reseller.).

16Remove the filler bezel from the PC’s front panel and replace it with the universal front bezel to give access to the newly installed drive.

17Install any other accessories before replacing the cover. Reconnect all cables and power cords.

18Verify the new configuration by checking the HP Summary Screen. Refer to page 44.

38