2 How to Install Accessories In Your PC

 

 

 

 

 

 

 

Installing Mass Storage Devices

 

Installing a CD-ROM, Tape or Zip Drive in a Front Shelf

 

 

 

 

 

 

 

 

WARNING

To avoid electric shock and harm to your eyes by laser light from a CD-

 

ROM drive, do not open the CD-ROM drive enclosure. The drive should

 

be serviced by authorized service personnel only.

 

The PC has an integrated Enhanced IDE controller which supports up

 

 

to four IDE devices. Removable media IDE devices, such as CD-ROM

 

drives, tape drives and Zip drives, require front access. You can install a

 

removable media IDE drive in the bottom front shelf.

 

Refer to the drive’s manual to see if you must set jumpers or if there is

 

a special installation procedure to follow.

 

1 Disconnect the computer’s power supply cord and any connection to

 

a telecommunications network.

 

2 Remove the computer’s cover.

 

3 Press the two retaining clips (indicated by ① on the label on your

 

PC) of the front drive unit inward and slide the unit forward about

 

halfway.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4Remove any data and power cables connected to the rear of the devices in the front drive unit. (Most models have a CD-ROM drive.)

35