2 How to Install Accessories In Your PC

Installing Mass Storage Devices

8Lower the drive into the free groove of the mounting bracket (ensure that the top of the drive is faces the right way). Use the two pins on the mounting bracket to slot the drive into place.

9Position the other mounting bracket on top, aligning it properly so that it clicks into place.

10Draw the computer’s data cable through the front drive bay area and connect the data cable to the rear of each drive.

The connectors are shaped to fit one way only. If you are not sure which connector to use, refer to "Connecting IDE Devices", on page 27.

Data cable

11Using both hands, lift the drive unit and slide it back into the computer about halfway.

37