HP ENVY 6-1111nr Ultrabook 6 Installing an IDE Hard Disk Drive in the Bottom Rear Shelf, disk drive, components, how to do this, a telecommunications network

2 How to Install Accessories In Your PC Installing Mass Storage Devices

	Installing an IDE Hard Disk Drive in the Bottom Rear Shelf
	The PC has an integrated Enhanced IDE controller which supports two
	Fast IDE hard disk drives. Refer to the drive’s manuals to see if you
	must set jumpers or if there is a special installation procedure to follow.
	You can install either a 3.5-inch or a 5.25-inch hard disk drive in this
	shelf. It is recommended that you use the bottom rear shelf if you want
	to replace the existing hard disk drive. You can use the top rear shelf
	(located under the power supply) if you want to install a second hard
	disk drive.
CAUTION	Handle the hard disk drive with care. Avoid shocks and violent
	movement as this can cause damage to the hard disk drive’s internal
	components.
	Make sure that you back up your files before you install a hard disk
	drive. Refer to your operating system documentation for information on
	how to do this.
	1 Disconnect the computer’s power supply cord and any connection to
	a telecommunications network.
	2 Remove the computer’s cover and power supply.
	3 At the rear of the computer, unlatch the metal plate and remove it.

4If there is a disk drive on the bottom tray (and you want to replace it), disconnect the power cable and data cable from this drive.

32