3 Troubleshooting Your PC

HP Setup Program

HP Setup Program

Check your PC’s configuration when you first use the PC and each time after you install, remove, or upgrade accessories. Follow these instructions:

First, Turn Off Your PC Turn on the display and then the PC. If the PC is already turned on, save your data and exit all programs. For Windows NT 4.0 and Windows 95, use the Shut Down command.

To Go to the HP Summary Screen

To Go to the Setup Program

While the Vectra logo appears on your display, press . This will take you to the HP Summary Screen. The Summary Screen will appear for only a short time. To retain the screen indefinitely (until you decide to leave it), press .

To go immediately into the Setup program while the Vectra logo appears on your display (and bypass the Summary Screen), press instead of .

66