HP 6100 manual Load originals and load paper, Load originals on the glass

3load originals and load paper

You can copy from originals loaded on the glass or in the automatic document feeder. You can also print and copy onto a variety of paper types, weights, sizes, and transparency films. It is important, however, that you choose the right paper and make sure that it is loaded correctly and not damaged.

load originals

Your HP OfficeJet provides two ways to load originals.

•load originals on the glass

•load originals in the automatic document feeder

load originals on the glass

You can copy, fax, or scan any original by placing it on the glass.

Note: Many of the Special Features options, such as Image Size or Poster, will not work correctly if the glass and lid backing are not clean. For more information, see clean the glass and clean the lid backing on page 41.

1Lift the lid and place the original face down on the glass in the front-right corner with the sides of the originals touching the right and bottom edges.

It is important to use the front-right corner when using the copy, fax, or scan feature.

Tip: If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper on top of the transparency.

Top edge of original

2Close the lid by pushing down on the lever below the front panel.

9