HP 6100 manual Set the paper type, Set the paper size

		load originals and load paper
paper	tips
Continuous (banner)	Continuous banner paper is also known as computer or z-fold paper.
paper	•	Before loading banner paper, remove all other paper from the paper
(works only with		tray, then remove the output tray.
printing)
		Remove the output
		tray.
		Insert the unattached
		edge of the paper into
		the paper tray.
	•	If you use non-HP banner paper, use 20-lb. paper and fan the paper
		before loading it.
	•	Verify that the stack of banner paper contains at least five pages in
		the stack.
	•	Carefully tear off the perforated edge strips from both sides of the
		paper stack, if any, and unfold and refold the paper to make sure the
		pages do not stick together.
	•	Put the paper in the paper tray so that the unattached edge is at the
		top of the stack. Insert the first edge into the paper tray until it stops,
		as shown in the illustration above.

set the paper type

If you want to use a different type of paper, such as photo paper, transparency film, banner paper, or envelopes, simply load that paper in the main tray. You should then change the paper type settings to ensure the best print quality.

You can change copy settings from the front panel or from the HP Director. When you change settings using the front panel, the copy settings are reset two minutes after the unit completes the copy.

1Press Paper Type.

2Press until the appropriate paper type appears.

3Press Enter to choose the displayed paper type.

set the paper size

For more information, see recommended paper-size settings for printing in the HP Photo & Imaging Help

For Copying:

1Press Menu.

2Press 1, then press 2.

This selects Copy Setup, then selects Paper Size.

3 Press until the desired size appears, then press Enter to select it.

reference guide 15