chapter 9

notice to all users of the European Economic Area (EEA)

This product is designed to interwork with the analogue telephone networks in the following countries:

German

UK

Netherlands

 

 

 

France

Spain

Italy

 

 

 

Belgium

Luxembourg

Sweden

 

 

 

Austria

Denmark

Ireland

 

 

 

Norway

Finland

Switzerland

 

 

 

Greece

Portugal

 

Network compatibility depends on customer selected settings, which must be reset to use the equipment on a telephone network in a country/region other than where the product was purchased. Contact the vendor or Hewlett-Packard Company if addition product support is necessary.

This equipment has been certified by the manufacturer in accordance with Directive 1999/5/EC (annex II) for Pan-European single-terminal connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first instance.

notice to users of the Irish telephone network

This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the unlikely event of problems with loop disconnect dialing, it is recommended to use this equipment only with the DTMF tone dial setting.

notice to users of the German telephone network

The HP 6100 Series products are designed to connect only to the analogue public-switched telephone network (PSTN). Please connect the TAE N telephone connector plug, provided with the hp officejet 6100 series, into the wall socket (TAE 6) code N. The hp officejet 6100 series products can be used as a single device and/or in combination (in serial connection) with other approved terminal equipment.

geräuschemission

LpA < 70 dB am Arbeitsplatz im Normalbetrieb

nach DIN 45635 T. 19

66

hp officejet 6100 series