Installing a memory card (optional)

Your digital camera contains 16 MB of internal memory that allows you to store images and video clips in your camera. However, you can use an optional memory card (purchased separately) instead to store images and video clips. For information on the memory cards that are supported with your camera, see Purchasing camera accessories on page 110.

NOTE If a memory card is installed in the camera, all new images and video clips will be stored only on the memory card. The internal memory and its file system are not available when a memory card is installed in the camera.

1With the battery/memory card door open on the bottom of the

camera, insert the memory card in the slot behind the batteries as shown. Make sure the memory card snaps into place.

2 Close the battery/memory card door.

To remove a memory card, press down on the top edge of the memory card, and it will spring outward from the slot.

NOTE You can install or remove an optional memory card while the camera is powered on with an optional HP AC power adapter.

16

hp photosmart 630 series user’s manual