Printing images
To print images that have been unloaded to the computer, you can use the HP Photo & Imaging software that was shipped with the camera.
You can also connect the camera directly to any HP Photosmart printer or to any other HP printer with a front panel USB port, then print either all images in the camera, or those images you
have tagged for direct print via the Print 
button on the
camera. (For information on how to use the Print 
button, see Tagging images for direct print on page 48.)
To print directly to an HP Photosmart printer or to any other HP printer with a front panel USB port:
1Turn on the camera.
2Check that the printer is turned on and is online. (There should be no blinking lights on the printer or printer error messages displayed.) Load paper into the printer, if needed.
3Your camera came with a special
USB cable for connecting the camera directly to a printer. Connect the square end of the USB cable to the printer.
4 Open the rubber door on the side of
the camera and connect the small end of the USB cable to the USB connector on the camera.
Chapter 5: Unloading and printing images | 69 |
