9.Rotate the slot cover retention latch back in place to secure the expansion card.

10.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed.

11.Replace the computer access panel.

12.Reconnect the power cord and turn on the computer.

13.Lock any security devices that were disengaged when the computer access panel was removed.

14.Reconfigure the computer, if necessary.

Drives

Description

Hard drives/Solid-state drives

2-TB, 7200-rpm

1-TB, 7200-rpm, 3.5-inch

1-TB, hybrid SSD, 2.5-inch

500-GB, 7200-rpm

500-GB, hybrid SSD, 2.5-inch

500-GB, 5400-rpm, 2.5-inch, FIPS

500-GB, 2.5-inch, self-encrypting (SED)

500-GB, 7200-rpm, 3.5-inch

256-GB Solid-state Drive (SSD), self-encrypting (SED)

256-GB Solid-state Drive (SSD)

180 GB Solid-state Drive (SSD)

128-GB Solid-state Drive (SSD), self-encrypting drive (SED)

30 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis

Page 38
Image 38
HP 700 G1 manual Drives, Description Hard drives/Solid-state drives