HP 700 G1 manual Processor, Description

Processor

Description

Intel Core i5-4590, 3.3 GHz

Intel Core i5-4570, 3.2 GHz

Intel Core i3-4160, 3.6 GHz

Intel Core i3-4150, 3.5 GHz

Intel Core i3-4130, 3.4 GHz

1.Prepare the computer for disassembly (Preparation for disassembly on page 20).

2.Remove the access panel (Access panel on page 21).

3.Remove the heat sink (Heat sink on page 45).

4.Rotate the locking lever to its full open position (1).

5.Raise and rotate the microprocessor retainer to its fully open position (2).

6.Carefully lift the processor from the socket (3).

CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and handling

them could cause irreparable damage. Once pins are damaged it may be necessary to replace the system board.

The heat sink must be installed within 24 hours of installing the processor to prevent damage to the processor’s solder connections.

Reverse the removal procedure to install a new processor.

NOTE: After installing a new processor onto the system board, update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at: http://h18000.www1.hp.com/support/files.

46 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis