Description

128-GB Solid-state Drive (SSD)

120-GB Solid-state Drive (SSD)

32-GB Solid-state Drive (SSD)

Optical drives

Blu-ray BD-Writer XL Drive

DVD±RW drive

DVD-ROM drive

Grommet, hard drive isolation, blue

When installing drives, follow these guidelines:

The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0.

Connect secondary hard drives and optical drives to one of the light blue SATA connectors on the system board (labeled SATA1 and SATA2).

HP has provided four extra 6-32 silver mounting screws installed next to the hard drive bays (1). The mounting screws are required for hard drives installed in the upper (secondary) hard drive bay. If you are replacing a primary hard drive in the lower bay, remove the silver and blue mounting screws from the old drive and install them in the new drive.

Drives 31

Page 39
Image 39
HP 700 G1 manual Description, GB Solid-state Drive SSD