HP 700 manual Getting started

Chapter 2 Getting started 27

•To activate (or deactivate) the numeric keypad, press and hold

the key as you press the key. While the numeric

keypad is activated, the symbol appears in the status area of the taskbar.

Be sure the numeric keypad is deactivated and caps lock is off while you set your password and before you turn off your HP

Jornada. Check for either the or symbols in the status

area of the task bar at the lower right of the Jornada display screen. If either of these symbols appear, be sure to deactivate them before setting or re-entering your password.

•To type accented or international characters, press and hold

the key as you press the keys corresponding to the character (international versions only). International versions of the HP Jornada have slightly different keyboard layouts.

When using Terminal Server Client, the key is not

available for use in typing extended or international keyboard characters. See Appendix C for information on alternative keystroke combinations in Terminal Server Client.

•To generate extended characters or keyboard commands, hold

down or as you press a key. Holding down the key will activate the character or command printed in yellow,

while pressing will activate the character or command printed in blue.

You can also use the Keyboard control panel to adjust how quickly characters repeat when you hold down a key. To open

the Keyboard control panel, press.