4! :Battery level (actual icon shown depends on the

istateof your camera batteries; seeManaging

Focusbrackets(seethe next section, Using the focus

N©TE If you change other camera settings, icons for those settings will also be displayed across the top and bottom of the Live View screen. For more information, see Advanc_ captur_ se#ings on page 37.

Using the focus brackets

The two brackets in the middle of the LiveVirtu screen show the focus region for the picture you are taking. When you press the Shutter button halfway down, the camera uses this focus region to measure and then lock the focus using this region. This is called F_us L_L

The focus brackets turn green in the Live View screen and the AF viewfinder light turns on solid green when the image is in focus and the camera can lock the focus. However, the focus

brackets turn red and the AF viewfinder light blinks green when the camera is unable to focus.

If the focus brackets turn red and the AF viewfinder light blinks, release the Shutter button, re-frame the subject for your picture, and then press the Shut_r button halfway down again. If the camera still cannot focus after several tries, the lighting may be too low, or there may not be enough contrast in the focus region. Try using Focus Lock to focus on an object about the same distance away but in a higher-contrast region, then point the camera at the object you were originally trying to photograph.

26

hp photosmart 730 series user'smanual