Front I/O assembly
Description | Spare part number |
|
|
Front I/O assembly | |
|
|
1.Prepare the computer for disassembly (Preparation for disassembly on page 94).
2.Remove the access panel (Access panel on page 95).
3.Remove the front bezel (Front bezel on page 96).
4.Rotate the drive cage to its upright position.
5.Disconnect the cables from the system board as follows:
●Yellow connector labeled FRONT_USB
●Black connector labeled MEDIA 3.0
●Blue connector labeled FRONT AUD
130 | Chapter 6 Removal and replacement procedures: Small Form Factor (SFF) |