Bezel blanks

Description

Spare part number

 

 

Optical drive 5.25-inch bezel blank

732770-001

 

 

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to be removed before installing a drive. To remove a bezel blank:

1.Remove the access panel (Access panel on page 45)

2.Remove the front bezel (Front bezel on page 47)

3.Remove the bezel blank for the appropriate drive:

●To remove a 5.25-inch bezel blank, press inward on the retaining tabs that hold the bezel blank in place (1) then pull the bezel blank from the front bezel (2).

NOTE: After removing the 5.25-inch drive bezel blank and installing a drive, you can install an optional bezel trim piece (available from HP) that surrounds the front of the drive.

48

Chapter 5 Removal and replacement procedures: Tower (TWR)