Computer will not boot from hard drive.
Cause | Solution |
|
|
Hard Drive's “Emulation Type” is set to “None.” (some | Run the Computer Setup utility and change the “Emulation |
models) | Type” to “Hard Disk” in the device's details under Storage > |
| Device Configuration. |
|
|
Hard drive is damaged. | Observe if the front panel Power LED is blinking RED and if |
| any beeps are heard. See Appendix A, POST error messages |
| on page 236 to determine possible causes for the blinking |
| red and beep codes. |
| See the Worldwide Limited Warranty for terms and |
| conditions. |
|
|
Computer seems to be locked up. |
|
|
|
Cause | Solution |
|
|
Program in use has stopped responding to commands. | 1. Use the task manager to close programs that do not |
| respond. |
| 2. Attempt the normal Windows “Shut Down” procedure. If |
| this fails, press the power button for four or more |
| seconds to turn off the power. To restart the computer, |
| press the power button again. |
|
|
206 | Chapter 9 Troubleshooting without diagnostics |