Fan sink
Description | Spare part number |
|
|
Fan sink | |
|
|
1.Prepare the computer for disassembly (Preparation for Disassembly on page 73).
2.Remove the computer access panel (Computer Access Panel on page 74).
3.In the order indicated, loosen the four captive screws that secure the fan sink to the system board.
CAUTION: Fan sink retaining screws should be removed in diagonally opposite pairs (as in an
X)to even the downward forces on the processor. This is especially important as the pins on the socket are very fragile and any damage to them may require replacing the system board.
Figure
4.Disconnect the fan cable from the white system board connector labeled CPUFAN (1).
112 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis