5.Remove the drive from the drive bay as follows:

●To remove a 5.25-inch drive in the desktop configuration, press down on the yellow drivelock mechanism (1) and slide the drive from the drive bay (2).

CAUTION: When the yellow drivelock is pressed, all the 5.25-inch drives are released so do not tilt the unit and allow the drives to fall out.

Figure 6-15Removing a 5.25-inch Drive in the Desktop Configuration (Optical Drive shown)

●To remove a 5.25-inch drive in the minitower configuration, pull up on the green drivelock mechanism (1) for that specific drive and slide the drive from the drive bay (2).

Figure 6-16Removing a 5.25-inch Drive in the Minitower Configuration (Optical Drive shown)

90 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis