10.Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the bezel.

Figure 6-52Changing from a Minitower to a Desktop Configuration

11.Replace the front bezel and computer access panel.

12.Reconnect the power cord and turn on the computer.

13.Lock any security devices that were disengaged when the computer access panel was removed.

Changing from a Desktop to a Minitower Configuration

1.Prepare the computer for disassembly (Preparation for Disassembly on page 73).

2.Remove the computer access panel (Computer Access Panel on page 74).

3.Remove the front bezel (Front Bezel on page 75).

4.Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays.

122 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis