Changing from a Minitower to a Desktop Configuration

1.Prepare the computer for disassembly (Preparation for Disassembly on page 73).

2.Remove the computer access panel (Computer Access Panel on page 74).

3.Remove the front bezel (Front Bezel on page 75).

4.Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays.

5.To release the drives from the 5.25-inch drive bay, lift the release tab on the green latch drive bracket for the drive (1). While lifting the release tab, slide the drive from its drive bay (2). Repeat this step for each 5.25-inch drive.

Figure 6-50Releasing the 5.25-inch Drives from the Drive Bays (Minitower)

120 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis