5.A latch drive bracket with release tabs secures the drives in the drive bay. Lift the release tab on the latch drive bracket (1) for the drive you want to remove, then slide the drive from its drive bay

(2).

Figure 7-16Removing the Drives

Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay

1.Prepare the computer for disassembly (Preparation for Disassembly on page 125)

2.Remove the access panel (Computer Access Panel on page 126)

3.Remove the front bezel (Front Bezel on page 127)

4.If you are installing a drive in a bay covered by a bezel blank, remove the bezel blank. See Bezel Blanks on page 128 for more information.

142 Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis