Insufficient memory error during operation.

Cause

Solution

 

 

Too many Terminate and Stay Resident programs (TSRs)

Delete any TSRs that you do not need.

are installed.

 

 

 

You have run out of memory for the application.

Check the memory requirements for the application or add

 

more memory to the computer.

 

 

Power LED flashes Red five times, once every second, followed by a two second pause, and the computer beeps five times. (Beeps stop after fifth iteration but LEDs continue flashing.)

Cause

Solution

 

 

 

Memory is installed incorrectly or is bad.

1.

Reseat DIMMs. Power on the system.

 

2.

Replace DIMMs one at a time to isolate the faulty

 

 

module.

 

3.

Replace third-party memory with HP memory.

 

4.

Replace the system board.

 

 

 

Solving Processor Problems

If you encounter processor problems, common causes and solutions are listed in the following table.

Table D-14Solving Processor Problems

Poor performance is experienced.

Cause

Solution

 

 

 

Processor is hot.

1.

Make sure the airflow to the computer is not blocked.

 

2.

Make sure the fans are connected and working properly

 

 

(some fans only operate when needed).

 

3.

Make sure the processor heat sink is installed properly.

 

Power LED flashes Red three times, once every second, followed by a two second pause.

 

 

Cause

Solution

Processor is not seated properly or not installed.

1.Check to see that the processor is present.

2.Reseat the processor.

292 Appendix D Troubleshooting Without Diagnostics