7.Replace the access panel.
8.Reconnect the power cord and turn on the computer.
9.Lock any security devices that were disengaged when the access panel was removed.
Bezel Blanks
1.Prepare the computer for disassembly (Preparation for Disassembly on page 73).
2.Remove the computer access panel (Computer Access Panel on page 74).
3.Remove the front bezel (Front Bezel on page 75).
4.Gently pull the subpanel, with the bezel blanks secured in it, away from the front bezel, then remove the desired bezel blank.
CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel.
Figure
NOTE: When replacing the subpanel, ensure that the aligning pins and any remaining bezel blanks are in their proper orientation. The logo on the subpanel should be located at the bottom of the subpanel when properly oriented.
Bezel Blanks 77