Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to be removed before installing a drive. To remove a bezel blank:

1.Remove the access panel (Access Panel on page 166).

2.Remove the front bezel (Front Bezel on page 167)..

3.To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it

(2).

Figure 8-3Removing a bezel blank

4.Replace the front bezel.

Memory

Description

Spare part number

 

 

4-GB, PC3-10600

585157-001

 

 

2-GB, PC3-10600

635803-001

 

 

1-GB, PC3-10600

635802-001

 

 

The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3- SDRAM) dual inline memory modules (DIMMs).

DIMMs

The memory sockets on the system board can be populated with up to four industry-standard DIMMs. These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum memory support, you can populate the system board with up to 16-GB of memory configured in a high-performing dual channel mode.

168 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis