HP ProCurve 8212zl 8200zl Series, the Introducing, Table 1-2.Management Module LEDs, Figure 1-4.Management Module LEDs

Introducing the ProCurve Series 8200zl Switch

Front of the Switch

8200zl Series	the Introducing
Switch	ProCurve

Figure 1-4. Management Module LEDsTable 1-2. Management Module LEDs

These LEDs are located on the Management Module.

LED	State	Meaning
Auxiliary (green/	Blinking	Indicates the switch is processing a USB command file.
orange) For more	green1
information see the
Management and	On green	The switch has finished processing the USB command file successfully.
Configuration Guide	Blinking	Indicates an error condition.
for your switch.
	orange2
	Off	Indicates that no USB device has been inserted, or that the inserted USB device
		cannot be recognized, or that no command file can be found on the inserted USB
		device.
DIM	On green	DIM (Dual in-line Memory Module) status is known and fault free.
(green/orange)	Off	DIM status is unknown.
	Blinking	If DIM, Fault, and Self Test LEDs are blinking, DIMM failed self-test.
	orange1	If DIM and Fault LEDs are blinking, an operational fault has occurred.
		If fast blinking (400ms On and 400ms Off), an operational alert occurred and is
		unresolved.
CF	On green	CF (CompactFlash) status is known and fault free
(green/orange)	Off	CF status is unknown.
	Blinking	If CF, Fault, and Self Test LEDs are blinking, CompactFlash failed self-test.
	orange1	If CF and Fault LEDs are blinking, an operational fault has occurred.
		If fast blinking (400ms On and 400ms Off), an operational alert occurred and is
		unresolved (for example, CompactFlash not present).

1-5