Release Notes for 07.8.04 Non-Redundant Management on ProCurve 9304M and ProCurve 9308M Routing Switches

management module, and also downloadable from the ProCurve website (see “To Download Product Documentation:” on page 3).

Non-Redundant Management on ProCurve 9304M and ProCurve 9308M Routing Switches

Management modules without Redundant Management are sometimes termed “M1” modules (for “Management 1”). These modules, now discontinued, operate only in the ProCurve 9304M and ProCurve 9308M routing switches. M1 modules include:

•J4141A ProCurve 9300 10/100 Management Module (16-port — discontinued)

•J4144A ProCurve 9300 Gigabit SX Management Module (8-port — discontinued)

•J4146A ProCurve 9300 Gigabit 4LX/4SX Management Module (8-port — discontinued)

NOTE: M1 management modules do not operate in the ProCurve 9315M routing switch. Also, if you are using an M1 management module in a ProCurve 9304M or ProCurve 9308M, no other management module (non- redundant or redundant) can be installed in the routing switch.

Maximum Size of Startup-Config and Running-Config Files

Each ProCurve device has a maximum supported size for the running-config and the startup-config file. If you use TFTP to load additional information into a device’s running-config or startup-config file, it is possible to exceed the maximum supported size. If this occurs, you will not be able to save the configuration changes.

Table 7 lists the maximum size of the running-config and the startup-config files on ProCurve devices.

Table 7: Maximum Sizes Supported for running-config and the startup-config Files

Device

Maximum Size of running-config

 

and startup-config files

 

 

ProCurve 9315 using Management II or

256 kilobytes (KB)

higher

 

 

 

ProCurve 9304M or ProCurve 9308M

256 KB

using Management II or higher

 

 

 

ProCurve 9304M or ProCurve 9308M

128 KB

using Management I (discontinued)

 

 

 

ProCurve 6308M-SX or ProCurve

64 KB

6208M-SX (discontinued)

 

 

 

NOTE: The maximum supported file size of each file is not the combined size of the running-config and startup- config files. The running-config and startup-config files can each be the size listed in Table 7.

To determine the size of an ProCurve device’s running-config or startup-config file, copy the file to a TFTP server. Then use the directory services on the server to list the size of the copied file. To copy the running-config or startup-config file to a TFTP server, use one of the following commands.

•To copy the running-config to a TFTP server: copy running-config tftp <ip-addr><filename>

•To copy the startup-config file to a TFTP server: copy startup-config tftp <ip-addr> <filename>

13