Software Fixes

 

 

Release Notes for 07.8.04

 

 

 

 

 

 

 

 

Bug ID

 

Bug Description

Protocol/

Version

Version

 

 

 

 

Feature

Found

Fixed

 

 

 

 

 

 

 

 

56399

 

When rate limiting is enabled, the ip rebind [acl-

ACL

 

07.8.02

 

 

 

num] command does not function correctly and

 

 

 

 

 

 

some ACL definitions are changed.

 

 

 

 

 

 

 

 

 

 

 

56846

 

When an EP 8 Port Mini-GBIC Redundant

UDLD

 

07.8.02

 

 

 

Management module is installed, if you configure

 

 

 

 

 

 

the ip high-perfcommand on a ProCurve module,

 

 

 

 

 

 

the UDLD configuration does not recover after a

 

 

 

 

 

 

system reload.

 

 

 

 

 

 

 

 

 

 

 

56946

 

You can bind ACLs to a virtual routing interface

ACL

 

07.8.02

 

 

 

even if one or more ports that belong to the virtual

 

 

 

 

 

 

routing interface have an ACL-based rate limiting

 

 

 

 

 

 

policy configured.

 

 

 

 

 

 

If an ACL-based rate limit is configured on a port, no

 

 

 

 

 

 

ACL can be configured on that port or any virtual

 

 

 

 

 

 

routing interface that includes the port. The ACL-

 

 

 

 

 

 

based rate limiting policy needs to be removed

 

 

 

 

 

 

before you can apply the ACL to the port or any

 

 

 

 

 

 

virtual routing interface that includes the port.

 

 

 

 

 

 

 

 

 

 

 

56961

 

The no access-list<group-number> command is

ACL

 

07.8.02

 

 

 

not supported to remove all ACL entries from a

 

 

 

 

 

 

group.

 

 

 

 

 

 

 

 

 

 

 

57006

 

On an EP 8 Port Mini-GBIC Redundant

ACL

 

07.8.02

 

 

 

Management module, ACL statements that contain

 

 

 

 

 

 

tos-masking and tos-marking entries are not

 

 

 

 

 

 

checked for duplicated entries.

 

 

 

 

 

 

 

 

 

 

 

57387

 

When an EP 8 Port Mini-GBIC Redundant

System

 

07.8.02

 

 

 

Management module is deleted from the routing

 

 

 

 

 

 

switch, the CPU deletes the Layer 4 CAM entry

 

 

 

 

 

 

from the module. The software then accesses the

 

 

 

 

 

 

incorrect hardware device, causing a system

 

 

 

 

 

 

reload.

 

 

 

 

 

 

 

 

 

 

 

57422

 

On an EP 8 Port Mini-GBIC Redundant

SSH

 

07.8.02

 

 

 

Management module, an incorrect MAC address for

 

 

 

 

 

 

an unsuccessful SSH session is displayed in show

 

 

 

 

 

 

log command output.

 

 

 

 

 

 

 

 

 

 

 

57588

 

On the EP 8 Port Mini-GBIC Redundant

OSPF

 

07.8.02

 

 

 

Management module, enabling the CPU Protection

 

 

 

 

 

 

feature causes OSPF to drop adjacencies.

 

 

 

 

 

 

 

 

 

 

 

57678

 

The routing switch translates the destination of NAT

NAT

 

07.8.02

 

 

 

packets incorrectly when the following conditions

 

 

 

 

 

 

apply:

 

 

 

 

 

 

• When an IP address in the NAT destination

 

 

 

 

 

 

with static port mapping is used.

 

 

 

 

 

 

• If more than one port mapping is configured for

 

 

 

 

 

 

same IP address.

 

 

 

 

 

 

 

 

 

 

40