Release Notes for 07.8.04 |
|
| Software Fixes | |
|
|
|
|
|
Bug ID | Bug Description | Protocol/ | Version | Version |
|
| Feature | Found | Fixed |
|
|
|
|
|
43721 | After you install a | 10GE link | 07.6.05 | 07.8.01c |
| the dm delete |
|
|
|
| routing switch to reload. |
|
|
|
|
|
|
|
|
44138 | CPU spikes occur for about 8 seconds when you | CPU, ACL | 07.6.06 | 07.8.01c |
| add or remove ports with an outbound ACL on a |
|
|
|
| VLAN. |
|
|
|
|
|
|
|
|
45057 | The show cpu command displays 1% CPU | CPU | 07.8.00 | 07.8.01c |
| utilization even though there are a very large |
|
|
|
| number of packets transmitted through the CPU. |
|
|
|
|
|
|
|
|
47395 | If the primary link in an LACP 802.3ad trunk goes | LACP | 07.8.00 | 07.8.01c |
| down for more than 90 seconds, then comes back |
|
|
|
| up, port flapping occurs. |
|
|
|
|
|
|
|
|
47584 | When you add a MAC address in a trunk group, a | Trunk Group | 07.6.06 | 07.8.01c |
| data access exception may occur in the |
|
|
|
| “ipc_r_read” routine. |
|
|
|
|
|
|
|
|
47825 | RIP redistribution does not update the OSPF | RIP, OSPF | 07.6.06 | 07.8.01c |
| forwarding address field when RIP is updated. |
|
|
|
|
|
|
|
|
48859 | BGP router A redistributes a tagged BGP route as | BGP, OSPF | 07.6.06 | 07.8.01c |
| an OSPF |
|
|
|
| running OSPF. Router B sends the OSPF LSA to |
|
|
|
| router C. If BGP router A changes the tag, router |
|
|
|
| C’s OSPF database is updated, but not the OSPF |
|
|
|
| route. |
|
|
|
|
|
|
|
|
49240 | If you disconnect a 10 Gigabit Ethernet port when a | 10GE link | 07.6.04 | 07.8.01c |
| large number of modules are installed in a switch, |
|
|
|
| packet loss may result in a 10GE link for three to |
|
|
|
| five seconds. |
|
|
|
|
|
|
|
|
49319 | After you enter the no ip forward route command, | OSPF | 07.6.00 | 07.8.01c |
| OSPF cannot add a route from |
|
|
|
| database. |
|
|
|
|
|
|
|
|
49731 | The trunk threshold command does not take effect | Trunk Group | 07.8.1 | 07.8.01c |
| until you reload the routing switch. Also, when you |
|
|
|
| remove a trunk and |
|
|
|
| existing threshold value is applied to the newly |
|
|
|
| created trunk. |
|
|
|
|
|
|
|
|
49914 | When you change the router ID (by modifying the IP | OSPF | 07.8.00 | 07.8.01c |
| address of loopback), OSPF stops advertising the |
|
|
|
| default route. This problem is not detected when the |
|
|
|
| the |
|
|
|
| configured. |
|
|
|
|
|
|
|
|
50203 | The routing switch does not flash a MAC address | MRP | 07.8.00 | 07.8.01c |
| when the MRP topology changes, even if the |
|
|
|
| routing switch receives a topology change packet. |
|
|
|
|
|
|
|
|
50541 | Network latency jumps from | MAC filters | 07.8.01 | 07.8.01c |
| 300+ milliseconds when MAC filters are applied. |
|
|
|
|
|
|
|
|
33