Software Fixes

 

 

Release Notes for 07.8.04

 

 

 

 

 

 

 

 

Bug ID

 

Bug Description

Protocol/

Version

Version

 

 

 

 

Feature

Found

Fixed

 

 

 

 

 

 

 

 

 

 

07.8.03b

 

 

 

 

 

 

 

 

 

 

 

67638

 

Module: N/A

AAA

 

07.8.03b

 

 

 

Symptom: In a Switch or Router configured with the

 

 

 

 

 

 

AAA authentication login command using the line

 

 

 

 

 

 

method keyword, all the available commands do not

 

 

 

 

 

 

appear with the CLI prompt.

 

 

 

 

 

 

Resolution: Fixed in this release.

 

 

 

 

 

 

 

 

 

 

 

66617

 

Module: N/A

ACL

 

07.8.03b

 

 

 

Symptom: In a Switch or Router configured with line

 

 

 

 

 

 

modules, certain ACL configurations may result in

 

 

 

 

 

 

packets being forwarded to the CPU, causing high

 

 

 

 

 

 

CPU utilization,

 

 

 

 

 

 

Resolution: Fixed in this release.

 

 

 

 

 

 

 

 

 

 

 

66686

 

Module: N/A

BGP4

 

07.8.03b

 

 

 

Symptom: In a Router configured with BGP4 and

 

 

 

 

 

 

route dampening, the dampened routes are not

 

 

 

 

 

 

handled correctly during a state change, causing

 

 

 

 

 

 

BGP4 memory corruption

 

 

 

 

 

 

Resolution: Fixed in this release.

 

 

 

 

 

 

 

 

 

 

 

72584

 

Module: N/A

CLI

 

07.8.03b

 

 

 

Symptom: In a Switch or Router configuration, the

 

 

 

 

 

 

ICMP and TCP burst limit on a virtual routing

 

 

 

 

 

 

interface is not deleted correctly. This is apparent in

 

 

 

 

 

 

the running-config when the VLAN to which the

 

 

 

 

 

 

virtual routing interface is bound is deleted and then

 

 

 

 

 

 

the virtual routing interface is configured again.

 

 

 

 

 

 

The following configuration shows the ICMP and

 

 

 

 

 

 

TCP burst configuration for a virtual routing

 

 

 

 

 

 

interface:

 

 

 

 

 

 

Interface ve 1

 

 

 

 

 

 

ip icmp burst-normal 1000 burst-max 2000 lockup 1

 

 

 

 

 

 

ip tcp burst-normal 1000 burst-max 2000 lockup 1

 

 

 

 

 

 

Resolution: Fixed in this release.

 

 

 

 

 

 

 

 

 

 

 

71019

 

Module: N/A

IP Stack

 

07.8.03b

 

 

 

Symptom: In a Router configuration, the transmit

 

 

 

 

 

 

data packets waiting for ARP resolution are

 

 

 

 

 

 

sometimes queued to an invalid port, causing a

 

 

 

 

 

 

system reset.

 

 

 

 

 

 

Resolution: Fixed in this release.

 

 

 

 

 

 

 

 

 

 

52