Boot Code Requirements for ProCurve Software |
|
| Release Notes for 07.8.04 | |
| Table 5: Boot Code Requirements |
| ||
|
|
|
| |
Routing | Modules | Software Image | Minimum Boot Code | |
Switch |
|
|
| Required |
|
|
|
|
|
ProCurve 9304M | With one of the following | HPR06636.bin | 2 | M1B07108.bin or greater |
ProCurve 9308M | M11 modules (without |
| recommended | |
|
| |||
| Redundant Management): |
|
|
|
| J4141A 10/100 |
|
|
|
| J4144A Gigabit SX |
|
|
|
| J4146A Gigabit 4LX/4SX |
|
|
|
|
|
|
| |
ProCurve 9304M | With any one or two of the | For M2, M4, and EP | For M2, M4, and EP | |
ProCurve 9308M | following Redundant | Redundant Management | Redundant Management | |
ProCurve 9315M | Management: modules | modules: |
| modules: |
| 2 | - H2R07803.bin | - M2B07605.bin or greater | |
| J4846A Gigabit SX (M2) |
|
|
|
| J4845A Gigabit LX2 (M2) |
|
| For |
| J4847A | For | Management modules: | |
| J4857A | Management modules: | - M2B07605.bin (all MP | |
| J4885A EP | - TSP07801d.bin | images) | |
| J4879A |
|
| - VSB07100.bin (VSM code) |
|
|
|
| |
|
|
|
| |
— | 10 Gigabit Ethernet (10GE) | The | 10 Gigabit Ethernet modules | |
| Modules | Gate Arrays (FPGAs) in 10 | do not use any of the boot | |
| Note: To upgrade FPGA | Gigabit Ethernet Modules | images listed above. | |
| use the following software. |
| ||
| code, refer to “Upgrading |
| ||
|
|
|
| |
| J4891A FPGA: |
| ||
| rxbmgr.bin – version 80, |
| ||
| revision 6 |
|
| |
|
| rxpp.bin – version 81, |
| |
|
| revision 16 |
|
|
|
| txaccum.bin – version 82, |
| |
|
| revision 6 |
|
|
|
| txpp.bin – version 83, |
| |
|
| revision 13 |
|
|
|
| ageram.bin – version 84, |
| |
|
| revision 4 |
|
|
|
| J8174A FPGA: |
| |
|
| xpp.bin – version 88, revision |
| |
|
| 37 |
|
|
|
| xtm.bin – version 89, revision |
| |
|
| 39 |
|
|
|
| Note: To determine the |
| |
|
| FPGA versions running on a |
| |
|
| 10GE module, enter show |
| |
|
| flash. The version |
| |
|
| information is listed |
| |
|
| separately for each 10 |
| |
|
| Gigabit Ethernet module in |
| |
|
| the chassis. |
|
|
|
|
|
|
|
ProCurve 6308M- | — | HPR06636.bin | 2 | M1B07108.bin or greater |
SX |
|
| recommended | |
|
|
| ||
|
|
|
|
|
6