Understanding PPU Requirements

PPU Software Requirements

HP-UX 11i v1 Requirements

For PPU Versions B.06.x on HP-UX 11i v1

The following software is required for PPU versions B.06.x on HP-UX 11i v1:

❏HP-UX 11i v1

❏PPU software bundle T2351AA (version B.06.x) located on the following HP web site (search for “T2351AA”): software.hp.com

❏Kernel driver diag2

IMPORTANT

For Superdome systems, the Utility subsystem firmware must be 6.40 or greater. PPU is not supported on versions prior to 6.40. The Utility firmware revision is displayed in two places by the Management Processor (MP). To determine your version, check the main menu when you first log into the MP, or type CM at the main menu to display the command menu, then HE for help.

Required Patches for PPU on HP-UX 11i v1

The following patch (or superseded patch) is required for PPU B.06.x on HP-UX 11i v1:

•PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang fix

NOTE

At the time of publication, there are no required patches for PPU B.06.x

 

on HP-UX 11i v2

 

 

20

Chapter 2