Installing and Configuring PPU Software

Un-installing PPU Software

WARNING

NOTE

Un-installing PPU Software

You should not un-install the PPU software from your PPU system.

If you un-install the PPU software, you may be charged for 100% utilization of the processors in your PPU system.

If you need to un-install the PPU software, execute the following command:

/usr/sbin/swremove -x enforce_scripts=false T2351AA

Executing the above swremove command produces error and warning messages; however, if the Execution Phase succeeds, the PPU software was successfully removed.

You can verify the PPU software was successfully un-installed by executing the following command:

/usr/sbin/swlist grep T2351AA

You should not see a listing of the PPU software T2351AA in the output of the above command.

34

Chapter 3