|
| Installing and Configuring PPU Software |
|
| Getting Started |
Step | 3. Verify the ppud daemon is running on the system/partition by executing | |
|
| the following command: |
|
| /usr/bin/ps |
|
| You should see the ppud daemon listed as an active process on the |
|
| system/partition. |
|
| If you do not receive the correct result for Step 3 (above) see “Manually |
|
| Starting the ppud Daemon” on page 32 for details. |
|
|
|
IMPORTANT |
| You need to configure the PPU software so your PPU system/partition |
|
| communicates with the utility meter. PPU systems do not have the PPU |
|
| software configured at the HP factory. See “Configuring PPU Software” |
|
| on page 29 for details on configuring the utility meter settings. |
|
| If Step 1, Step 2 and Step 3 (above) provide the correct results, your PPU |
|
| |
|
| system is compliant and no action is necessary for PPU software |
|
| installation or configuration. |
Chapter 3 | 25 |