c.Keyboard (see Keyboard on page 61)
d.Top cover (see Top cover on page 66) Remove the fingerprint reader board:
1.Turn the top cover upside down, with the front toward you.
2.Detach the fingerprint reader board cable from the top cover. (The fingerprint reader board cable is attached to the top cover with
3.Remove the Phillips PM2.5×3.5 screw (2) that secures the fingerprint reader board bracket to the top cover.
4.Slide the fingerprint reader board bracket (3) up and away from the top cover.
5.Remove the fingerprint reader board (4).
Reverse this procedure to install the fingerprint reader board.
72 | Chapter 4 Removal and replacement procedures |
