HP C2M12UA, Dv6 7363cl Refurb D1B19UARABA manual

Remove the solid-state drive:

1.Remove the Phillips PM2.0×3.5 screw (1) that secures the solid-state drive to the system board. (The solid-state drive tilts up.)

2.Remove the solid-state drive by pulling the drive away from the slot at an angle (2).

NOTE: The solid-state drive is designed with a notch to prevent incorrect installation into the solid-state drive slot.

Reverse this procedure to install the solid-state drive.

76 Chapter 4 Removal and replacement procedures