3.Remove the optical drive connector (3).
Reverse this procedure to install the optical drive connector cable.
Display assembly
NOTE: The display assembly spare part kit includes the display panel cable, 2 WLAN antenna transceivers and cables, and the webcamera/microphone module and cable.
Description | Spare part number |
|
|
For use on all computer models: |
|
|
|
|
|
|
|
For use only with computer models equipped with an Intel processor: |
|
|
|
equipped with a graphics subsystem with discrete memory) |
|
|
|
equipped with a graphics subsystem with discrete memory) |
|
|
|
Before removing the display assembly, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 51).
Component replacement procedures | 95 |
