HP C2M97UA C2M97UA (2), (4), (1), (2), (1), (2), (1), (3)

b.Thoroughly clean the thermal connections (1), (3) on the system board and the heat sink (2),

(4) before replacing a heat sink onto a system board. Continue to step 3.

c.Loosen the captive screws (1) and lift the UMA graphics heat sink (2) from the system board.

d.Thoroughly clean the thermal connections (1) on the system board and the heat sink (2) before replacing a heat sink onto a system board.

3.Reverse this procedure to replace the heat sink. Replace the thermal material that ships with the replacement heat sink.

Component replacement procedures 79