configuring X Windows on HP-UX (HP Visualize graphics cards)

hp Visualize- FXE, FX5 and FX10 device-dependent information

visuals are simply duplicates of visuals that would normally appear in the X visual list. In case that the extra visuals cause problems with applications, a screen option can be used to disable them.

To disable the GLX visuals, add the DisableGlxVisualsScreen Option to the X*screens file.For example:

Screen /dev/crt/

ScreenOption

DisableGlxVisuals

hp VISUALIZE-FXE/5/10 colormaps

HP VISUALIZE-FXE/5/10 devices have a total of 4 hardware colormaps. 2 of the colormaps are dedicated to the overlay planes. The remaining 2 colormaps are dedicated to the image planes.

Of the two overlay colormaps, one is permanently reserved for the default colormap. The other overlay colormap is available to applications.

changing the monitor type

A configuration tool is available to change the monitor type on HP VISUALIZE-FXE/5/10 devices. This tool permits users to change the monitor’s refresh rate, frame buffer resolution, and frame buffer memory configuration (e.g., Stereo, Double Buffer), when the device supports multiple options. To change the monitor type, the setmon command can be executed directly or done through the SAM system administration tool.

The setmon executable is located at /opt/graphics/common/bin/setmon. Under SAM this component is located under the top-level “Display” folder, next to the “X Server Configuration” icon.

NOTE

Changing the monitor type while the X Server is running will necessitate

 

killing and restarting the X Server.

 

 

30

Chapter 2