configuring X Windows on HP-UX (other graphics cards)

output devices

supported monitor configurations

All FireGL cards support multiple monitors. The FireGL X1 and X3 have dual DVI-I connectors, which will drive either digital or analog monitors. The FireGL T2 has one DVI-I and one VGA connector. When using a single monitor, the monitor can be attached to either connector. Monitors should be connected and powered up prior to system boot to ensure the system can read available DDC information and select optimum video timings.

Multiple monitors are supported in a Single Logical Screen (SLS) configuration. The maximum SLS screen width is 2560 for the X1 and T2 and 3840 for the X3. See the “using SAM to configure X Windows” section for details on configuring SLS with SAM.

Chapter 3

71