
Tips on Loading Paper in the IN Tray
All Papers
◆Be sure that paper is free of rips, dust, wrinkles, and curled or bent edges.
◆Make sure all the paper in the stack is the same size and type.
◆Tap the stack on a flat surface to even the edges of the paper.
◆Put the paper into the IN tray with the print side down and with the letterhead (top of the page) forward.
◆Push the paper forward into the IN tray until it stops.
◆Slide the paper width and length adjusters to fit snugly against the edges of the paper stack. Be sure that the paper stack lies flat in the IN tray and fits under the tab of the
HP Papers
◆HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting side of the paper, and insert paper with the arrow side facing up.
◆HP Premium Photo Paper: Load the shiny side facing down. Always load at least
◆HP Premium Transparency Film: Insert the film so that the white transparency strip, with arrows and the HP logo, is on top and going into the tray first.
◆HP
Special Considerations When Using Transparency Film
◆Load a maximum of 25 transparency sheets at a time.
◆Be sure to specify Transparency as the Paper Type setting.
◆Ink dries slower on film. Be sure to allow enough time for the ink to dry before using the transparency.
◆If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper over the transparency on the copier glass.
NOTE | We recommend using only HP Premium Inkjet or |
| copying on transparencies. Other transparency film can jam in the HP Color Copier. |
|
|