HP Color Copier manual Photo Mode, Copy Paper Size, TE Text Enhancement

Changing Copy Settings Using the Menu Commands

Photo Mode

Photo Mode temporarily turns the Text Enhancement (TE) setting off and the Enhance Light Colors (ELC) setting on for optimal copying of a photograph. For more information about using the TE and ELC settings, see “TE (Text Enhancement)” and “ELC (Enhance Light Colors)” later in this chapter.

To use the Photo Mode, do the following:

1Press Menu until Photo Mode (–+) ❍ appears.

2Press the plus (+) button to select Photo Mode.

The small circle to the right of the (– +) is filled in ● to indicate that Photo Mode is enabled; it is cleared ❍ when Photo Mode is turned off.

3Press Select/Resume to confirm your selection.

Copy Paper Size

Copy Paper Size lets you copy on either letter-sized (8.5-by-11-inches) or A4-sized (210-by-297-mm) paper.

To change the copy paper size, do the following:

1Press Menu until Copy Paper Size appears.

2Press Select/Resume to view the current default paper size.

3Press the minus (–)or plus (+) button to toggle between the paper sizes.

4Press Select/Resume to choose the paper size you want.

WARNING Do not copy onto envelopes or other smaller-sized papers. Copying onto smaller- sized papers can damage your HP Color Copier.

TE (Text Enhancement)

TE sharpens the edges of black text. It is turned on by default and should usually be left on. (TE is automatically turned off when you select Photo Mode.) However, turn TE off if:

◆Large, black typefaces look splotchy (not smooth).

◆Horizontal grainy or white bands appear in light- to medium-gray areas.

◆Thin, colored objects or lines contain black sections.

To turn TE on or off, do the following:

1Press Menu until TE appears.

2Press the minus (–)or plus (+) button to switch between off ❍ and on ●.

3Press Select/Resume to confirm your selection.

HP Color Copier User’s Guide 4-7